Ultragard 8: Pre-defined databases
==================================

The attached zip file contains five pre-defined databases. In each case, the database contains a single pre-defined ACU:

S1
S2; two doors, two readers
S2; one door, with in/out readers
S4; four doors, four readers
S4; two doors, each with in/out readers

Each database makes the following assumptions:

 - COM2 is used for communications
 - Unit number of the ACU is 1
 - Version 4 firmware is fitted
 - Microcard readers are used
 - No door sensor is fitted

There is only one access area defined (apart from the default area known as Outside World). All readers allow access to this one area except where in/out raeders are defined in which case the out readers allow access to the Outside World.

A single access level is defined which allows access to this area.

A single person is defined, with this access level.

To get your first card valid
============================

1. Start Communications
2. Start System Maintenance
3. Select Access Management, Personnel, Personnel IDs
4. Select "Test Person", Click on Insert, Enter ID number, Click on Add then OK.
